STIHL TS 800 16" Consaw Hire Dublin

STIHL TS 800 16″ Consaw Hire Dublin

Heavy-Duty Concrete, Asphalt & Masonry Cutting Saw

The STIHL TS 800 is a powerful professional petrol cut-off saw available to hire from A-Z Hire in Dublin.

Designed for demanding construction and civil engineering applications, the TS 800 uses a large 400 mm / 16 inch cutting wheel and can achieve a maximum cutting depth of approximately 145 mm.

This makes it an excellent choice where a standard 12″ or 14″ consaw does not provide enough cutting depth.

The STIHL TS 800 is commonly used for cutting:

• Concrete
• Reinforced concrete
• Asphalt
• Concrete slabs
• Paving
• Kerbs
• Concrete blocks
• Brick
• Masonry
• Stone
• Road surfaces
• Drainage openings
• Construction materials

The correct cutting blade must always be selected for the material being cut.

145 mm Maximum Cutting Depth

One of the biggest advantages of the STIHL TS 800 is its cutting depth.

With a 400 mm / 16″ cutting wheel, the machine can cut to approximately:

145 mm maximum depth

This additional depth makes the TS 800 particularly useful for jobs involving:

• Thick concrete slabs
• Deep concrete cuts
• Heavy paving
• Kerbs
• Roadworks
• Drainage work
• Structural openings
• Thick masonry
• Civil engineering applications

For contractors who need more cutting capacity than a typical handheld consaw provides, the TS 800 is an extremely useful machine.

Concrete Cutting Saw Hire Dublin

The STIHL TS 800 is particularly suited to professional concrete cutting applications.

Typical jobs include:

• Cutting concrete floors
• Cutting concrete slabs
• Creating openings
• Cutting around drainage
• Cutting channels through concrete
• Cutting concrete before breaking or demolition
• Cutting expansion or repair sections
• Cutting kerbs and paving
• Cutting reinforced concrete with the appropriate blade

Pre-cutting concrete before using a breaker can also help create a cleaner edge and provide greater control over the area being removed.

Asphalt Cutting Saw Hire

The TS 800 can also be fitted with a suitable blade for cutting asphalt and road surfaces.

Typical applications include:

• Road repairs
• Utility installations
• Drainage works
• Trench preparation
• Cutting around damaged asphalt
• Patching work
• Creating clean edges before excavation

Different blade specifications are used for asphalt and concrete, so tell A-Z Hire what material you intend to cut and we can advise on the correct blade.

16 Inch Consaw Hire

The STIHL TS 800 is commonly referred to on construction sites as a 16 inch consaw.

The larger 400 mm blade gives it considerably greater cutting capacity than smaller handheld cut-off saws while still remaining portable enough for site work.

It is particularly useful when contractors need a handheld machine capable of making a deeper cut without moving to a larger floor saw or specialist cutting machine.

Wet Cutting & Dust Control

Concrete, block and masonry cutting can create significant amounts of fine dust.

Where appropriate, water should be used during cutting to help:

• Reduce airborne dust
• Control silica-containing dust
• Cool the diamond blade
• Improve cutting performance
• Reduce excessive blade wear

The STIHL TS 800 is designed for use with a water supply for wet cutting applications.

Correct dust-control procedures and appropriate PPE should always be used when cutting concrete, masonry or similar materials.

Choosing the Correct Diamond Blade

The cutting blade is one of the most important parts of any concrete cutting setup.

Different blades are designed for different materials including:

• Concrete
• Reinforced concrete
• Asphalt
• Masonry
• Stone
• Abrasive construction materials

Using the correct blade improves cutting performance and helps reduce unnecessary blade wear.

Diamond blades and blade wear are charged separately from the machine hire where applicable.

If you’re unsure which blade you need, tell us what you are cutting and A-Z Hire can advise.

STIHL TS 800 Technical Specifications

Key Specifications

Engine displacement: 98.5 cm³
Power output: 5.0 kW / 6.8 hp
Cutting wheel: 400 mm / 16″
Maximum cutting depth: 145 mm
Weight: approximately 12.7 kg
Fuel tank capacity: approximately 1.2 litres

The TS 800 also features STIHL’s anti-vibration system, long-life air filtration, decompression valve and ElastoStart system to assist starting and operation.

TS 800 or Smaller Consaw – Which Do I Need?

The size of consaw required usually depends on the depth of cut.

A smaller 12″ or 14″ machine may be easier to handle and perfectly adequate for shallower cutting.

The STIHL TS 800 16″ consaw becomes particularly useful where you need a deeper cut of up to approximately 145 mm.

Typical examples include:

• Thick concrete slabs
• Large kerbs
• Deep road cuts
• Heavy paving
• Structural concrete
• Deep masonry cutting

If you’re unsure which machine you require, tell us the material and approximate depth you need to cut and we can advise.

Consaw Hire for Builders, Contractors & Civil Engineering

The STIHL TS 800 is suitable for a wide range of professional users including:

• Builders
• Groundworkers
• Civil engineering contractors
• Road contractors
• Landscapers
• Drainage contractors
• Concrete contractors
• Demolition contractors
• Utility contractors
• Property maintenance companies

Its combination of high power and deep cutting capacity makes it particularly useful for demanding site work.

Why Hire a STIHL TS 800 from A-Z Hire?

A-Z Hire supplies professional concrete cutting equipment from our Walkinstown, Dublin 12 hire centre.

Customers choose A-Z Hire for:

• Professional-grade STIHL cutting equipment
• Large 400 mm / 16″ cutting capacity
• Up to 145 mm cutting depth
• Concrete and asphalt cutting solutions
• Diamond blades available for different materials
• Wet cutting and dust-control options
• Equipment maintained by our workshop
• Experienced advice
• Contractor and DIY hire
• Convenient Dublin 12 location
• Established tool hire in Dublin

As a STIHL Authorised Dealer and Service Centre, A-Z Hire also has specialist experience with STIHL professional equipment.

Hire a STIHL TS 800 Consaw in Dublin

For STIHL TS 800 hire, 16 inch consaw hire, concrete saw hire, asphalt cutting saw hire or petrol cut-off saw hire in Dublin, contact A-Z Hire.

Blade is hired or sold separately. Trolly also available. Dust suppression must be used when cutting