Wall Chaser Hire Dublin – Hilti DCH 150 SL with Vacuum
Professional Channel Cutter Hire for Electrical, Plumbing & Construction Work
Need a wall chaser hire in Dublin for cutting clean, accurate channels into concrete, blockwork, brick or masonry?
A-Z Hire supplies the powerful Hilti DCH 150 SL Wall Chaser with Dust Extraction Vacuum, providing a professional solution for electricians, plumbers, builders and renovation contractors who need to cut channels for cables, conduits and pipework.
Also commonly known as a channel cutter, chasing machine, wall cutter or slitting machine, the Hilti DCH 150 SL is designed for demanding wall and floor chasing applications.
With a maximum cutting capacity of approximately 50 mm deep × 50 mm wide, it is particularly useful where a larger or deeper channel is required.
Wall Chaser & Vacuum Hire Kit
The channel cutter is hired together with a compatible Hilti dust extraction vacuum, helping capture concrete and masonry dust directly at the cutting point.
This provides significantly better dust control than chasing with a conventional angle grinder and makes the machine particularly suitable for:
- Indoor renovation work
- Occupied buildings
- Commercial premises
- Residential properties
- Electrical installations
- Plumbing installations
- Refurbishment projects
- Jobs where controlling construction dust is important
Ideal for Electricians & Plumbers
The Hilti wall chaser is ideal for creating channels for:
- Electrical cables
- Electrical conduit
- Data and communication cables
- Water pipes
- Heating pipework
- Alarm and security cables
- Small building services
The twin diamond cutting discs create two controlled parallel cuts. The material between the cuts can then be removed to form a clean channel ready for the required service.
Cuts Up to 50 mm Deep & 50 mm Wide
One of the main advantages of the Hilti DCH 150 SL is its larger chasing capacity compared with many smaller wall chasing machines.
Cutting Capacity
Maximum cutting depth: up to 50 mm
Maximum cutting width: up to 50 mm
Diamond disc diameter: 150 mm
This makes the machine suitable for heavier chasing applications where a smaller wall chaser may not provide enough depth or width.
Suitable Materials
Depending on the correct diamond blade and application, the Hilti wall chaser can be used on common construction materials including:
- Concrete
- Concrete block
- Brick
- Masonry
- Limestone
- Similar mineral building materials
If you are not sure whether this is the correct machine for your job, A-Z Hire can advise.
Why Use a Wall Chaser Instead of an Angle Grinder?
A purpose-built wall chaser provides a much more controlled method of creating channels than using a conventional angle grinder.
Advantages include:
- Straighter channels
- Consistent cutting depth
- Adjustable channel width
- Faster chasing
- Effective dust extraction
- Cleaner finished work
- Reduced clean-up
- Purpose-built operation
For electricians, plumbers and contractors carrying out repeated chasing work, this can significantly improve productivity.
Professional Wall Chaser Hire Dublin
A-Z Hire supplies professional equipment to contractors, tradespeople and DIY customers throughout Dublin.
Our Hilti wall chaser and vacuum kit provides a complete chasing and dust extraction setup without the need to organise a separate vacuum system.
Typical Applications
- Electrical rewiring
- Installing sockets and switches
- Running electrical conduit
- Plumbing renovations
- Heating pipe installation
- Bathroom refurbishment
- Kitchen renovation
- Commercial fit-outs
- Property refurbishment
- New construction
- Wall chasing
- Floor chasing
Diamond Blades & Consumables
The Hilti DCH 150 SL operates using specialist 150 mm diamond slitting discs.
Diamond blades and other consumables are charged separately where applicable.
Different blade setups may be required depending on the material being cut and the width of channel required.
A-Z Hire can advise on the correct setup for your application.
Chasing Hammers & Additional Equipment Available
After the wall chaser creates the two parallel cuts, the material between them normally needs to be removed.
A-Z Hire also supplies:
- Chasing hammers
- SDS-Max demolition hammers
- Concrete breakers
- Dust extraction equipment
- Diamond cutting equipment
Ask our hire desk if you need a complete wall chasing setup.
Why Hire from A-Z Hire?
A-Z Hire is an independent Dublin tool hire company supplying professional equipment to contractors, tradespeople and DIY customers.
Customers choose A-Z Hire for:
- Professional-grade hire equipment
- Equipment maintained in our Dublin workshop
- Experienced advice
- Daily and weekly hire options
- Contractor and DIY tool hire
- Convenient Dublin 12 location
- Delivery options across Dublin
- Extensive cutting, drilling and concrete equipment range
Whether you need wall chaser hire, channel cutter hire, chasing hammer hire or dust extraction equipment, we can help you choose the correct setup.
Wall Chaser Hire Near Me – Dublin 12
A-Z Hire is based in Walkinstown, Dublin 12, ideally located for customers across Dublin including:
Dublin City Centre, Crumlin, Tallaght, Ballymount, Greenhills, Clondalkin, Rathfarnham, Sandyford, the Naas Road and surrounding areas.
If you are searching for:
Wall Chaser Hire Dublin
Channel Cutter Hire Dublin
Hilti Wall Chaser Hire
Wall Chaser with Vacuum Hire
Concrete Wall Chaser Hire
Tool Hire in Dublin
contact A-Z Hire for availability.
Hire the Hilti DCH 150 SL Wall Chaser & Vacuum
For professional tool hire in Dublin, contact A-Z Hire to reserve the Hilti DCH 150 SL Wall Chaser and Dust Extraction Vacuum Kit.
If you’re unsure which chasing machine, blade or breaker you require, simply tell us what material you’re cutting and what you need to install and we can advise on the most suitable equipment.
