How do I Mix Cement or Concrete Using a Cement Mixer Belle Minimix 150 – Step-by-Step Guide

Planning a building or landscaping project? Whether you’re laying a patio, setting fence posts, or building a wall, knowing how to mix cement or concrete properly is essential. The Belle Minimix 150 Cement Mixer is a trusted, easy-to-use electric mixer that’s perfect for DIY and professional jobs alike.

You can hire the Belle Minimix 150 from A-Z Hire in Dublin with flexible rental options and expert support.

What You’ll Need:

  • Belle Minimix 150 Cement Mixer
  • Cement, sand, and aggregate (for concrete)
  • Cement and sand (for mortar mix)
  • Water
  • Shovel or bucket
  • Wheelbarrow
  • PPE: gloves, goggles, dust mask

Step-by-Step Guide to Mixing Concrete or Cement:

Step 1: Set Up the Mixer Safely

Place the Belle Minimix 150 on a level, stable surface, close to your materials. Plug it into a safe power source and make sure the drum is clean and in the correct mixing position (angled slightly downward).

Step 2: Start the Mixer

Turn on the mixer before adding any materials. This helps prevent clogging and ensures even mixing from the start.

Step 3: Add Water First

Pour a small amount of clean water into the drum. Starting with water helps reduce dust and makes mixing easier. You’ll adjust the water content later as needed.

Step 4: Add Cement and Sand (for Mortar) or Aggregate (for Concrete)

For mortar, use a standard 1:4 ratio of cement to sand.
For concrete, use a 1:2:4 mix – 1 part cement, 2 parts sand, 4 parts gravel or aggregate.

Add half of your materials gradually while the drum rotates. Then add a bit more water.

Step 5: Add Remaining Dry Materials

Slowly add the remaining cement, sand, and aggregate (if making concrete). Monitor the consistency – it should be smooth, not too dry or too runny.

Tip: Add water in small amounts to fine-tune the mix. The ideal mix should hold its shape but still pour easily.

Step 6: Mix for 3–5 Minutes

Let the Belle Minimix 150 run for 3–5 minutes until the mix is consistent and lump-free. Don’t overmix, as this can weaken the final result.

Step 7: Pour the Mix

Tilt the drum to pour the concrete or mortar into a wheelbarrow or directly onto your work area. Always clean the mixer immediately after use to prevent hardened residue.

Cleaning Tip:

Add water and a few shovels of gravel to the drum, let it run for a few minutes, then empty and rinse thoroughly.

Hire a Belle Minimix 150 Cement Mixer in Dublin Today

At A-Z Hire, we offer Belle Minimix 150 Cement Mixers for hire in Dublin, perfect for builders, landscapers, and DIYers.

  • Daily and weekly hire options
  • Easy-to-use electric mixers
  • Fully serviced and reliable equipment
  • Expert advice and support
  • Collection and delivery across Dublin

Ready to mix? Hire the Belle Minimix 150 today from A-Z Hire in Dublin.
Book by calling now 014192800 to get started on your next concrete or mortar project.